FEES for jobs bid January 1, 2019. through December 31, 2019

(Scroll down for new fees effective January 1, 2020.)

In General:

  • Woodwork Institute’s western service area is California, Nevada, Oregon, Utah and Washington.
  • All “General,” “Including” and “Subject to” notes on relevant program service fee schedules remain applicable, unless otherwise indicated below.
  • Correction fee of $75 will be charged on improper Request for Certificate and Labels.
  • Hybrid Fees apply only when project specifications require an inspection by a DAS.
  • Fees are subject to change and are required to be paid in full at time of request, prior to service.
  • Hourly rates — CCP and SCIS: $140; CCP Hybrid: $210; CSIP: $170; EWS, IIS and MCP: $200.

CERTIFIED COMPLIANCE PROGRAM™ (CCP)

Within Western Service Area

Shop Drawing Certification Only

  • Basic Fee: $200; Hybrid Fee: $310

Contract Value Less than $10,000

  • Basic Fee: $310; Hybrid Fee: $710; Sub-Sub: $110

Contract Value from $10,000 to $20,000

  • Basic Fee: $790, Hybrid Fee: $1,175, Sub-Sub: $170

Contract Value Greater than $20,000

  • Basic Fee: $1,375, Hybrid Fee: $2,060, Sub-Sub: $340

Validation Inspection (if failed items are discovered)

  • Fee: $280, minimum 2 hours of inspection time

Other Service Areas

Any Contract Value

  • Basic Fee: $1,375; Hybrid Fee: $2,060; Sub-Sub: $340

MONITORED COMPLIANCE PROGRAM™ (MCP)

Within Western Service Area

Millwork Contract Value of Less than $20,000

  • Basic Fee: $2,060

Millwork Contract Value of $20,000 or more

  • Basic Fee: $3,090

Other Service Areas

Any Contract Value

  • Basic Fee: $4,640

All Service Areas

Additional fees based on total contract amount including modifications of:

  • 2.00% of any amount above $100,000 up to and including $500,000
  • 1.50% of any amount above $500,000 up to and including $1,000,000
  • 1.00% of any amount above $1,000,000

CERTIFIED SEISMIC INSTALLATION PROGRAM™ (CSIP)

Within Western Service Area

Without CCP or MCP Requirement

  • Basic Fee: $1,715; Hybrid Fee: $2,060

With CCP or MCP Requirement

  • Basic Fee: $1,460; Hybrid Fee: $1,755

Other Service Areas

Without CCP or MCP Requirement

  • Basic Fee: $2,580; Hybrid Fee: $3,090

With CCP or MCP Requirement

  • Basic Fee: $2,375; Hybrid Fee: $2,780

SITE COMPLIANCE INSPECTION SERVICE (SCIS)

Within Western Service Area

  • Basic Fee: $270

Other Service Areas

  • Not available

EXPERT WITNESS SERVICE (EWS) and INDEPENDENT INSPECTION SERVICE (IIS)

Within Western Service Area

  • Basic Fee: $1,030

Other Service Areas

  • Basic Fee: $1,605

FEES for jobs bid on or after January 1, 2020

In General:

  • Woodwork Institute’s western service area is California, Nevada, Oregon, Utah and Washington.
  • All “General,” “Including” and “Subject to” notes on relevant program service fee schedules remain applicable, unless otherwise indicated below.
  • Correction fee of $75 will be charged on improper Request for Certificate and Labels.
  • Hybrid Fees apply only when project specifications require an inspection by a DAS.
  • Fees are subject to change and are required to be paid in full at time of request, prior to service.
  • Hourly rates — CCP and SCIS: $145; CCP Hybrid: $215; CSIP: $175; EWS, IIS and MCP: $215.

CERTIFIED COMPLIANCE PROGRAM™ (CCP)

Within Western Service Area

Shop Drawing Certification Only

  • Basic Fee: $205; Hybrid Fee: $315

Contract Value Less than $10,000

  • Basic Fee: $315; Hybrid Fee: $725; Sub-Sub: $115

Contract Value from $10,000 to $20,000

  • Basic Fee: $805, Hybrid Fee: $1,200, Sub-Sub: $175

Contract Value Greater than $20,000

  • Basic Fee: $1,405, Hybrid Fee: $2,100, Sub-Sub: $345

Validation Inspection (if failed items are discovered)

  • Fee: $290, minimum 2 hours of inspection time

Other Service Areas

Any Contract Value

  • Basic Fee: $1,405; Hybrid Fee: $2,100; Sub-Sub: $345

MONITORED COMPLIANCE PROGRAM™ (MCP)

Within Western Service Area

Millwork Contract Value of Less than $20,000

  • Basic Fee: $2,100

Millwork Contract Value of $20,000 or more

  • Basic Fee: $3,150

Other Service Areas

Any Contract Value

  • Basic Fee: $4,735

All Service Areas

Additional fees based on total contract amount including modifications of:

  • 2.00% of any amount above $100,000 up to and including $500,000
  • 1.50% of any amount above $500,000 up to and including $1,000,000
  • 1.00% of any amount above $1,000,000

CERTIFIED SEISMIC INSTALLATION PROGRAM™ (CSIP)

Within Western Service Area

Without CCP or MCP Requirement

  • Basic Fee: $1,750; Hybrid Fee: $2,100

With CCP or MCP Requirement

  • Basic Fee: $1,490; Hybrid Fee: $1,790

Other Service Areas

Without CCP or MCP Requirement

  • Basic Fee: $2,630; Hybrid Fee: $3,150

With CCP or MCP Requirement

  • Basic Fee: $2,425; Hybrid Fee: $2,835

SITE COMPLIANCE INSPECTION SERVICE (SCIS)

Within Western Service Area

  • Basic Fee: $275

Other Service Areas

  • Not available

EXPERT WITNESS SERVICE (EWS) and INDEPENDENT INSPECTION SERVICE (IIS)

Within Western Service Area

  • Basic Fee: $1,050

Other Service Areas

  • Basic Fee: $1,640

AMC Fee Schedule

Effective January 1 through December 31, 2019

Download PDF

AMC Fee Schedule

Effective January 1, 2020

Download PDF