Submit Acknowledged Product Listing Information

Please submit, if available, the CSI MasterFormat 3-Part Specification for your product [.pdf only, 2 mb limit]:

Please submit up to 5 photos of your product [.jpg or .jpeg only, 1 mb limit per image]. Please note that at least one is required:

Please submit up to 5 documents (spec sheets, etc.) [pdf only, 2 mb limit per document] that you would like linked to your product description.

PRODUCT ACKNOWLEDGMENT provides review of products including hardware and sheet products to assure conformance to the appropriate minimum requirements of the North American Architectural Woodwork Standards. In compliance with the Acknowledged Product Program, I declare that the base adjusters:

• Do conform to ANSI/BHMA standards (builderhardware.com) minimum Grade 2 requirements
• Have the material supplier’s name or unique brand marking stamped on hinges, slides, and locks for
identification purposes.
• Are of first-class workmanship, free of manufacturing imperfections (such as tool or machine marks), and
consistent in exposed finish appearance,
• Are of the adjustable screw type, having a floor bearing surface of at least 1-1/8” (28.6mm) in diameter at
each foot, and will provide for leveling the cabinet from inside of the case through holes in the cabinet
bottom with cover caps.
as required by the North American Architectural Woodwork Standards, latest edition, hardware
requirements (Section 10, Casework, subsections 10.5.1, 10.5.1.5.,10.5.1.6 and 10.5.1.11)

PRODUCT ACKNOWLEDGMENT provides review of products including hardware and sheet products to assure conformance to the appropriate minimum requirements of the North American Architectural Woodwork Standards. In compliance with the Acknowledged Product Program, I declare that the catches:

• Do conform to ANSI/BHMA standards (builderhardware.com) minimum Grade 2 requirements
• Have the material supplier’s name or unique brand marking stamped on hinges, slides, and locks for
identification purposes.
• Are of first-class workmanship, free of manufacturing imperfections (such as tool or machine marks), and
consistent in exposed finish appearance,
• On inactive door at locking pairs and at tall storage cabinets over 72” (1829mm), will have 18” (457 mm)
reach
As required by the North American Architectural Woodwork Standards, latest edition, hardware
requirements (Section 10, Casework, subsections 10.5.1, 10.5.1.5, 10.5.1.6 and 10.7.4.7)

PRODUCT ACKNOWLEDGMENT provides review of products including hardware and sheet products to assure conformance to the appropriate minimum requirements of the North American Architectural Woodwork Standards. In compliance with the Acknowledged Product Program, I declare that the submitted product(s) do conform and have been tested to ISO 4586 and ASTM D-695, D-792, D-635, and/or D-790 for Compact Laminate (CGS) products ANSI-Z124.7, ASTM-G-22, -D-785, -D-256, -D-638, -D-696, -D-570, Barcol for Solid Surface products as required by the North American Architectural Woodwork Standards, latest edition, laminate requirements (Section 4, Sheet Products, subsections 4.8.1, 4.9.1, 4.10, 4.11.1 and 4.21)

PRODUCT ACKNOWLEDGMENT provides review of products including hardware and sheet products to assure conformance to the appropriate minimum requirements of the North American Architectural
Woodwork Standards.

In compliance with the Acknowledged Product Program, I declare that the locks, pulls, shelf rests, hanger rods,
flanges, and/or sliding door tracks:
• Do conform to ANSI/BHMA standards (builderhardware.com) minimum Grade 2 requirements
• Have the material supplier’s name or unique brand marking stamped on hinges, slides, and locks for
identification purposes.
• Are of first-class workmanship, free of manufacturing imperfections (such as tool or machine marks), and
consistent in exposed finish appearance,
• At shelf rests for bored holes, either include a minimum of 0.1969” (5.0mm) metal pin or double 0.1969”
(5.0mm) plastic pins (meeting ANSI/BHMA latest edition Grade 1 requirements) and meet or exceed these
standards’ maximum shelf load requirement of 200 lbs. (91kg.), except, softwood veneer core requires
single pins with shoulder or double pin shelf rests.
• For hangar rods require hardwood, a minimum of 1 ¼” (31.8mm) in diameter or metal, a minimum of 1
1/16” (27.0mm)
as required by the North American Architectural Woodwork Standards, latest edition, hardware
requirements (Section 10, Casework, subsections 10.5.1, 10.5.1.5, 10.5.1.6, 10.5.1.9 and 10.6.19)

PRODUCT ACKNOWLEDGMENT provides review of products including hardware and sheet products to
assure conformance to the appropriate minimum requirements of the North American Architectural
Woodwork Standards.
In compliance with the Acknowledged Product Program, I declare that the pocket door hardware:
• Do conform to ANSI/BHMA standards (builderhardware.com) minimum Grade 2 requirements
• Have the material supplier’s name or unique brand marking stamped on hinges, slides, and locks for
identification purposes.
• Are of first-class workmanship, free of manufacturing imperfections (such as tool or machine marks), and
consistent in exposed finish appearance,
• Are on cabinet doors a maximum of 23-5/8” (600 mm) in width and that the maximum door height and
weight are within the material suppliers listed capacity.
as required by the North American Architectural Woodwork Standards, latest edition hardware
requirements (Section 10, Casework, subsections 10.5.1, 10.5.1.5, 10.5.1.6 and 10.5.1.10)

PRODUCT ACKNOWLEDGMENT provides review of products including hardware, and sheet products to
assure conformance to the appropriate minimum requirements of the North American Architectural
Woodwork Standards.
In compliance with the Acknowledged Product Program, I declare that the below submitted product(s) do conform and have been tested to the respective standards:
Voluntary Product Standard – PS1 for High Density Overlay products
ANSI A135.4 for Hardboard products, Tempered Grade
ANSI A208.1 for Particle Board, Grade M2 or better with the following minimum properties:
Modulus of Rupture (M-2) 1885 psi
Modulus of Rupture (M-3) 2393 psi and
Moisture Resistance will not exceed a maximum 5.5% thickness swell after 24-hour submersion
according to the Linear Expansion with Change in Moisture Content requirements of ASTM D120-
37
ANSI A208.2 for Medium Density Fiberboard, Grade 130 or better with the following minimum properties:
Modulus of Rupture (Grade 130) 3130 psi
Modulus of Rupture (Grade 155) 4050 psi and
Moisture Resistance will not exceed a maximum 5.5% thickness swell after 24-hour submersion in
accordance with the Linear Expansion with Change in Moisture Content requirements of ASTM D120-
37
as required by the North American Architectural Woodwork Standards, latest edition, laminate
requirements (Section 4, Sheet Products, subsections 4.14.1, 4.15.1, 4.16.1 through 4.16.1.2, and 4.17.1
through 4.17.1.2)

PRODUCT ACKNOWLEDGMENT provides review of products including hardware and sheet products to
assure conformance to the appropriate minimum requirements of the North American Architectural
Woodwork Standards.
In compliance with the Acknowledged Product Program, I declare that the submitted product(s) do conform and have been tested to ANSI/HPVA HP-1 2020, as required by the North American
Architectural Woodwork Standards, latest edition, laminate requirements (Section 4, Sheet Products,
subsections 4.6.11 and 4.7.6).